Metal Drawing Oil

HP DRAWMET 15, 15S is very important segment of the metal working industry is metal forming, in this process the metal instead of being cut or machined, is forced to flow to acquire the desired dimensions by the use of the suitable mechanical equipment. Metal forming process includes operations like pressing, stamping, deep drawing, wire drawing, and tube drawing and forging. During these operations considerable amount of heat and stress and developed. Our DRAWMET grades are tailor made to satisfy the various requirements included in metal drawing/forging operations.

HP DRAWMET 44 is Non staining, water-soluble cream coloured paste for “dry on” or emulsion application. It is manufactured with specially balanced mixture of soap and fat. The recommended dilution ratio with water is between i to 5 percent depending upon the gauge of wire to be drawn.

MAK Form AL has been specially designed for wire drawing applications of Aluminium and Aluminium alloys. It is blended from highly refined, hydroprocessed base stock
fortified with special EP and select lubricity additives. Surface finish and die life depend on the lubrication at the die and work piece interface. The chosen lubricity additive
ensures reduction of friction at the contact point. The special additive chemistry helps providing low residue, excellent resistance to oxidation and extended operating
life. This oil is based on non-active chemistry.